Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.
Traduciendo paso 2
Paso 2
-
Remove all 4 screws attached to the battery with a small Phillips head screwdriver.
-
Each screw on the back is M2 x 1.7mm
-
After the screws are taken out, remove the battery. The battery is the large black rectangle at the bottom of the area.
[* black] Remove all 4 screws attached to the battery with a small Phillips head screwdriver. | |
[* black] Each screw on the back is M2 x 1.7mm | |
- | [* black] After the screws are taken out, remove the battery. |
+ | [* black] After the screws are taken out, remove the battery. The battery is the large black rectangle at the bottom of the area. |
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.