Repara tus cosas Comunidad Tienda

Procedimiento de apertura de Google Pixel 3 XL

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Volver a la Guía
Inglés
Español
Paso 8
Google Pixel 3 XL Opening Procedure, Swing open the back cover: paso 0, imagen 1 de 3 Google Pixel 3 XL Opening Procedure, Swing open the back cover: paso 0, imagen 2 de 3 Google Pixel 3 XL Opening Procedure, Swing open the back cover: paso 0, imagen 3 de 3
Swing open the back cover

  • Swing the right edge of the back cover upwards and rest the flipped panel along the left side of the phone.

  • Be sure to maintain slack on the fingerprint sensor cable and prevent it from being pinched.

  • During reassembly, this is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.

  • During reassembly, follow this guide to install custom-cut adhesives for your back cover.

  • If you replaced the fingerprint sensor, you'll need to use this software tool to make the phone recognize the new sensor.

Abre el panel trasero

Gira el borde derecho del panel posterior hacia arriba y coloca el panel volteado a lo largo del lado izquierdo del teléfono.

Asegúrate de que el cable del sensor de huellas digitales esté flojo y evita que se pellizque.

Durante el reensamblaje, este es un buen punto para encender su teléfono y probar todas las funciones antes de sellarlo. Asegúrate de apagar el teléfono completamente antes de seguir trabajando.

Durante el reensamblaje,sigue esta guía para instalar adhesivos cortados a medida para tu panel trasero.

-[title] Swing open the back panel
-[* black] Swing the right edge of the back panel upwards and rest the flipped panel along the left side of the phone.
+[title] Swing open the back cover
+[* black] Swing the right edge of the back cover upwards and rest the flipped panel along the left side of the phone.
[* icon_note] Be sure to maintain slack on the fingerprint sensor cable and prevent it from being pinched.
[* icon_reminder] During reassembly, this is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.
-[* icon_reminder] During reassembly, [guide|126585|follow this guide|new_window=true] to install custom-cut adhesives for your back panel.
+[* icon_reminder] During reassembly, [guide|126585|follow this guide|new_window=true] to install custom-cut adhesives for your back cover.
+[* icon_reminder] If you replaced the fingerprint sensor, you'll need to use [link|https://pixelrepair.withgoogle.com/udfps|this software tool|new_window=true] to make the phone recognize the new sensor.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.