Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.
Traduciendo paso 2
Paso 2
-
Using your fingers, pull the small plastic tab away from the circuit board/faceplate sub-assembly.
-
Rotate the faceplate away from the circuit board.
-
Gently remove the faceplate from the circuit board, taking care to not break the small plastic tab on the other side of the sub-assembly.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.