Repara tus cosas Comunidad Tienda

Cambios al paso #2

Editado por matthew morris —

Edicion aprobada por matthew morris

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Using the Phillips #0 screwdriver, unscrew the 4 other silver 5mm long screws, which will stay in place once fully unscrewed, to the right of the fan.
-[* black] You may have to move some electrical tape to expose some screws.
+[* red] Using the Phillips #0 screwdriver, unscrew the 4 other silver 5mm long screws, which will stay in place once fully unscrewed, to the right of the fan.
+[* black] Remove the electrical tape to expose the heat sink screws.
[* black] Carefully disconnect the pin connector by pulling it from its slot.