Cambios al paso #1
Editado por Kris Rodriguez —
Edicion aprobada por Kris Rodriguez
- Antes
- Después
- Sin cambios
Líneas de Paso
| [title] Wireless Card Removal | |
| [* red] Locate the wireless card. | |
| [* black] Remove the one screw holding the card in using your PH0 bit. | |
| [* black] Remove the bracket holding the wireless card in. | |
| [* icon_note] Remember the orientation of the bracket for reinstallation. | |
| [* black] Remove the black and white wires from the wireless card. | |
| - | [* icon_note] For reinstallation it helps to push on the top of the connector to get it seated. Top being the end opposite where the wire comes into the connector |
| + | [* icon_note] For reinstallation it helps to push on the top of the connector to get it seated. Top being the end opposite where the wire comes into the connector. |