Saltar al contenido principal

Cambios al paso #5

Editado por Zachary Traynor

Edicion aprobada por Zachary Traynor

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Using a 3 mm Flathead Screwdriver, wedge and pry one section of the keyboard trim.
-[* orange] Gently lift the trim with your finger until multiple tabs of the keyboard trim are unclipped. Go around the trim and unclip all tabs one by one.
+[* black] Using a Spudger, pry a section of the keyboard trim.
+[* black] Gently lift the trim with your finger until multiple tabs of the keyboard trim are unclipped. Go around the trim and unclip all tabs one by one.
[* icon_note] You will hear multiple snaps, but don't worry, this is normal. Multiple tabs may unclip at once.