|
Introduction |
1* Take# Remove the battery out.
2*Unscrew# Unfasten all screws and remove the whole backplastic cover.
3*# You will see a connector down atconnectors next to the chargercharging port take. Disconnect them off and you can blow some air to take the dirt off.
4*# Take some paper and fold it 4 to 6 times (small one).
5*# After folding it make sure it is the size of the connector that is next to the Camera.
6*# Place the foldenfolded paper on top of the connector.
7*# Slowly get back all the plastic covers.
8*Screw# Put all screws back in all the screwsand fasten them.
9*# Place the battery, SD Card and the Sim back.
10*# Power on the Phone.
| | 99.9% It will work. | | | UPDATE: | | If you want to take it a step further,
| | | after that, you can go ahead and place the circuit board back in place, then place the paper on the connector(follow the steps 6-10) | | | *Even thermal pad might do the job. | | | Thanks, | | | I hope this will fix the problem ! |
|