Repara tus cosas Comunidad Tienda

Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement

Introducción

Follow this guide to remove the drive belt for the Wacker Compactor Plate VP1550AW 2014.

Qué necesitas

  1. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: paso 1, imagen 1 de 2 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: paso 1, imagen 2 de 2

    • Before you begin, be sure that the engine is powered off and is cool to the touch.

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    Editar

  2. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Loosen the belt guard: paso 2, imagen 1 de 1

    • Use a 1/2" socket and wrench to loosen the two bolts securing the belt guard.

    • The bolts are captive and should not be removed.

    Editar

  4. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: paso 3, imagen 1 de 2 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: paso 3, imagen 2 de 2

    • Remove the belt guard.

    Editar

  5. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: paso 4, imagen 1 de 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: paso 4, imagen 2 de 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: paso 4, imagen 3 de 3

    • Use scissors or a blade to cut the drive belt.

    • Remove the drive belt.

    Editar

  6. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Install a replacement belt: paso 5, imagen 1 de 1

    • Loop the replacement belt onto the small pulley.

    Editar

  7. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: paso 6, imagen 1 de 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: paso 6, imagen 2 de 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: paso 6, imagen 3 de 3

    • Replacing the belt poses a substantial pinching hazard. Wear safety gloves and be mindful where you position your fingers.

    • Guide the belt over the top of the clutch pulley.

    • Loop the belt underneath the pulley axle.

    • Rotate the pulley slowly and guide the built into the groove.

    • Getting the replacement belt back onto the drive pulley requires considerable strength.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Arthur Shi

Miembro Desde 01/03/18

254,052 Reputación

529 Guías creadas

Insignias: 47

+ 44 más insignias

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

17,271 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 33

Todo El Tiempo: 3,010