Saltar al contenido principal

WRS315SDHW Dispenser Assembly Replacement

Qué necesitas

  1. WRS315SDHW Dispenser Assembly Replacement, Safety precautions: paso 1, imagen 1 de 1
    • Before you begin your repair, perform the following:

    • Turn off your main water supply

    • Unplug your device

  2. WRS315SDHW Dispenser Assembly Replacement, Unfasten the dispenser panels: paso 2, imagen 1 de 2 WRS315SDHW Dispenser Assembly Replacement, Unfasten the dispenser panels: paso 2, imagen 2 de 2
    • The dispenser panel screws are located under the dispenser as if you're looking up into the dispenser tube (where the ice cubes and water come out).

    • Use a 1/4 inch socket wrench to remove the two 15.6 mm-long screws securing the two dispenser panels.

  3. WRS315SDHW Dispenser Assembly Replacement, Remove the dispenser panels: paso 3, imagen 1 de 3 WRS315SDHW Dispenser Assembly Replacement, Remove the dispenser panels: paso 3, imagen 2 de 3 WRS315SDHW Dispenser Assembly Replacement, Remove the dispenser panels: paso 3, imagen 3 de 3
    • Pull the dispenser panels straight down to separate them from the chassis.

    • Remove the dispenser panels.

  4. WRS315SDHW Dispenser Assembly Replacement, Unfasten the control board: paso 4, imagen 1 de 1
    • Use a 1/4 inch socket wrench to remove the two 15.6 mm-long screws securing the control board.

  5. WRS315SDHW Dispenser Assembly Replacement: paso 5, imagen 1 de 3 WRS315SDHW Dispenser Assembly Replacement: paso 5, imagen 2 de 3 WRS315SDHW Dispenser Assembly Replacement: paso 5, imagen 3 de 3
    • Tilt the bottom of the control board away from the chassis to release its clips.

    • Pull straight down to separate the control board enough to access its connectors.

  6. WRS315SDHW Dispenser Assembly Replacement, Disconnect the control board: paso 6, imagen 1 de 3 WRS315SDHW Dispenser Assembly Replacement, Disconnect the control board: paso 6, imagen 2 de 3 WRS315SDHW Dispenser Assembly Replacement, Disconnect the control board: paso 6, imagen 3 de 3
    • Disconnect the large connector attached to the right edge of the control board.

  7. WRS315SDHW Dispenser Assembly Replacement: paso 7, imagen 1 de 2 WRS315SDHW Dispenser Assembly Replacement: paso 7, imagen 2 de 2
    • Disconnect the small connector attached to the left edge of the control board.

  8. WRS315SDHW Dispenser Assembly Replacement, Remove the control board: paso 8, imagen 1 de 1
    • Remove the control board.

  9. WRS315SDHW Dispenser Assembly Replacement, Remove the plastic clip: paso 9, imagen 1 de 3 WRS315SDHW Dispenser Assembly Replacement, Remove the plastic clip: paso 9, imagen 2 de 3 WRS315SDHW Dispenser Assembly Replacement, Remove the plastic clip: paso 9, imagen 3 de 3
    • Use a flathead screwdriver, or a similar tool, to pry up the plastic clip securing the water hose.

    • Remove the plastic clip.

  10. WRS315SDHW Dispenser Assembly Replacement, Disconnect the water hose: paso 10, imagen 1 de 3 WRS315SDHW Dispenser Assembly Replacement, Disconnect the water hose: paso 10, imagen 2 de 3 WRS315SDHW Dispenser Assembly Replacement, Disconnect the water hose: paso 10, imagen 3 de 3
    • Use a flathead screwdriver, or a similar tool, to pry up the water hose enough to grip it with your fingers.

    • Pull the water hose straight up to disconnect it.

  11. WRS315SDHW Dispenser Assembly Replacement, Reposition the cables: paso 11, imagen 1 de 2 WRS315SDHW Dispenser Assembly Replacement, Reposition the cables: paso 11, imagen 2 de 2
    • Reposition the cables so they lay in front of the top plastic clip.

  12. WRS315SDHW Dispenser Assembly Replacement, Unclip the dispenser assembly: paso 12, imagen 1 de 3 WRS315SDHW Dispenser Assembly Replacement, Unclip the dispenser assembly: paso 12, imagen 2 de 3 WRS315SDHW Dispenser Assembly Replacement, Unclip the dispenser assembly: paso 12, imagen 3 de 3
    • There are two plastic clips that secure the dispenser assembly in the chassis.

    • Use a flathead screwdriver, or a similar tool, to press the plastic clip toward the dispenser assembly.

    • Repeat for the other plastic clip to completely separate the dispenser assembly from the chassis.

  13. WRS315SDHW Dispenser Assembly Replacement, Reposition the dispenser assembly: paso 13, imagen 1 de 3 WRS315SDHW Dispenser Assembly Replacement, Reposition the dispenser assembly: paso 13, imagen 2 de 3 WRS315SDHW Dispenser Assembly Replacement, Reposition the dispenser assembly: paso 13, imagen 3 de 3
    • Pull the dispenser assembly away from the chassis enough to access its connectors.

  14. WRS315SDHW Dispenser Assembly Replacement, Disconnect the dispenser assembly: paso 14, imagen 1 de 3 WRS315SDHW Dispenser Assembly Replacement, Disconnect the dispenser assembly: paso 14, imagen 2 de 3 WRS315SDHW Dispenser Assembly Replacement, Disconnect the dispenser assembly: paso 14, imagen 3 de 3
    • While performing this step, support the dispenser assembly so it doesn't fall.

    • Disconnect the connector attached to the dispenser assembly.

  15. WRS315SDHW Dispenser Assembly Replacement, Remove the dispenser assembly: paso 15, imagen 1 de 1
    • Remove the dispenser assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

Una persona más ha completado esta guía.

nicO

Miembro Desde 04/14/15

15,885 Reputación

88 Guías creadas

Equipo

Global Fixers Miembro de Global Fixers

Community

30 Miembros

501 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 110