Qué necesitas
-
-
How to Identify which Silvia version you have.
-
Remove Water tank, drip tray and portafilter.
-
Flip the machine upside down.
-
-
-
Remove screen screw with flat head screwdriver.
-
Remove the old screen.
-
Remove and soak diffuser in Joe Glo coffee cleaner.
-
-
-
-
Pry the gasket up with the sharp tip of the awl.
-
Use Joe Glo coffee cleaner and hot water to soak the grouphead for 10-15 minutes.
-
-
-
With a wire brush, clean the top of the grouphead.
-
Use a paper towel / regular towel to soak the dirty water from the grouphead.
-
Use the compressed air can to clean any excess water or coffee.
-
Last but not least, use the pick on the top and bottom rails to remove last bits of coffee debris.
-
-
-
Take the new gasket and install it with the lettering down.
-
Use a 1/4 inch flat punch to push down the gasket to ensure its nice and flat.
-
Insert the diffuser with the water channels facing down.
-
Place the new screen and insert the screw.
-
Use an 8mm socket wrench to tighten the screw.
-
