Introducción

If your speakers lose their sound quality, it is possible to replace them.

Partes

No se requieren partes.

  1. Close the laptop lid and flip the laptop over.
    • Close the laptop lid and flip the laptop over.

    • Switch the lock button on the left to the unlock position. (The unlock position is to the left side.)

    Agregar Comentario

  2. Push the release button to the right.
    • Push the release button to the right.

    • Hold the release button to the right and lift the battery out of its housing.

    Agregar Comentario

    • Open the laptop so the keyboard is facing you and the locate the thin plastic cover located directly above the keyboard.

    • Using your fingers, remove this long piece of plastic gently.

    • Do not apply too much force when removing the cover piece as it can break.

    Agregar Comentario

    • Remove the two 4.8 mm type-0 Phillips head screws located underneath the plastic cover piece.

    Agregar Comentario

    • Starting at the top, gently raise the keyboard enough to remove it from the socket.

    • DO NOT pull out the keyboard after its out of its socket. The keyboard is connected to the hard drive through a data cable and removing forcefully could damage the cable and laptop.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Locate the data cable that is connected to the motherboard.

    • Pull the white ZIF connector towards the screen to remove it.

    • Pull the black ribbon cable away from the screen.

    Agregar Comentario

    • With the black ribbon cable now disconnected, remove the keyboard from its housing.

    Agregar Comentario

    • Close the laptop and flip it over.

    • Remove all the 6.6 mm type-00 Phillips head screws along the perimeter and in the center of the laptop.

    Agregar Comentario

    • Remove the three 3.7 mm type-00 Phillips head screws located in the battery compartment.

    Agregar Comentario

    • Flip the laptop over and open the screen as far back as it can go.

    Agregar Comentario

    • Using your fingers, slide the black ZIF connector out.

    • Once the ZIF connector has been moved, the white ribbon cable can be removed.

    Agregar Comentario

    • Using your fingers, remove the white plastic connector located to the right of the ribbon connector.

    Agregar Comentario

    • Use the blue plastic opening tool to begin removing the cover.

    • After creating enough space, you can use your hands to completely open the cover.

    • Make sure all the screws have been removed before attempting to open the cover.

    Agregar Comentario

    • Put the laptop aside and locate the speakers attached to the cover.

    • Remove the two 3.6 mm type-00 Phillips head screws from each speaker.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Juan

Miembro Desde 11/01/13

109 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 20-5, Maness Winter 2013 Miembro de Cal Poly, Team 20-5, Maness Winter 2013

CPSU-MANESS-W13S20G5

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 13

Todo El Tiempo: 1,099