Introducción

This guide provides step by step instructions of how to replace a faulty optical drive.

Partes

No se requieren partes.

  1. Flip the laptop over so the bottom is facing up.
    • Flip the laptop over so the bottom is facing up.

    • Slide each of the three tabs on the bottom half of the assembly into the unlocked position.

  2. Gently lift the battery out of the computer.
    • Gently lift the battery out of the computer.

  3. Remove the single 3mm Phillips #00 screw that secures the wireless card cover.
    • Remove the single 3mm Phillips #00 screw that secures the wireless card cover.

  4. Remove the WIFI module cover. It will pull right off.
    • Remove the WIFI module cover. It will pull right off.

  5. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  6. Unplug the white and black wires from the WiFi module. Unplug the white and black wires from the WiFi module.
    • Unplug the white and black wires from the WiFi module.

  7. Remove the twelve 8mm button head Phillips #00 B8 screws.
    • Remove the twelve 8mm button head Phillips #00 B8 screws.

    • Remove the two 14 mm button head Phillips #00 B14 screws.

    • Remove the two 10 mm Phillips #00 battery compartment screws.

    • Remove the two 8 mm Phillips #00 screws.

  8. Remove the seven 4mm flat Phillips #00 screws.
    • Remove the seven 4mm flat Phillips #00 screws.

    • Remove the seven 20mm button head Phillips #00 screws.

  9. Use the plastic opening tool to pry the two halves apart.
    • Use the plastic opening tool to pry the two halves apart.

  10. Orient the bottom assembly as displayed.
    • Orient the bottom assembly as displayed.

  11. Remove the two 3 mm Phillips #00 screws. Remove the two 3 mm Phillips #00 screws.
    • Remove the two 3 mm Phillips #00 screws.

  12. Slide the optical drive out of the laptop through the opening on the left side of the bottom assembly.
    • Slide the optical drive out of the laptop through the opening on the left side of the bottom assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Geoff Wacker

Miembro Desde 30/09/13

74,422 Reputación

84 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 4

Todo El Tiempo: 629