Saltar al contenido principal
  1. Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.
    • Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.

  2. Locate hidden screw found in the middle of back hardcover.
    • Locate hidden screw found in the middle of back hardcover.

    • Here you will find a proprietary Japanese Screw Head.

    • Remove screw by using tool not provided by IFixit or by using the methods found here.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Peel off hard cover to expose interior of device
    • Peel off hard cover to expose interior of device

  5. Remove the two 1 mm screws using a Phillips #2 screwdriver.
    • Remove the two 1 mm screws using a Phillips #2 screwdriver.

  6. Unplug the internal cooling fan by tugging gently on the wire attatched to the device's motherboard
    • Unplug the internal cooling fan by tugging gently on the wire attatched to the device's motherboard

  7. Lift the internal cooling fan to remove the fan from the device
    • Lift the internal cooling fan to remove the fan from the device

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 5

Todo El Tiempo: 143