Saltar al contenido principal

Introducción

In this guide, we will be replacing the battery of the Toshiba Chromebook 2. Many power issues on the Chromebook come from complications with the laptop’s battery. Removing the broken battery and replacing it with a functioning battery will ensure the laptop will keep on running.

  1. Remove all external devices from the Toshiba Chromebook 2.
    • Remove all external devices from the Toshiba Chromebook 2.

  2. Close the Toshiba Chromebook 2 and turn it over so that the bottom of the laptop is facing upwards toward you with the lettering on the bottom facing right side up.
    • Close the Toshiba Chromebook 2 and turn it over so that the bottom of the laptop is facing upwards toward you with the lettering on the bottom facing right side up.

  3. Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver. Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver.
    • Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver.

  4. Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with the  Phillips #0 screwdriver. The rubber grips are glued in place, so you'll need to peel them up with a spudger or other pry tool.
    • Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with the Phillips #0 screwdriver.

    • The rubber grips are glued in place, so you'll need to peel them up with a spudger or other pry tool.

  5. Remove the back panel by pulling up on 2 adjacent corners.
    • Remove the back panel by pulling up on 2 adjacent corners.

  6. Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver. Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver.
    • Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver.

  7. Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard. Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard.
    • Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard.

  8. Remove the battery by gently pulling up on the bottom corners.
    • Remove the battery by gently pulling up on the bottom corners.

    Thank you for the step by step guide!

    yoena lopez - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

47 personas más completaron esta guía.

Foster Chaney

Miembro Desde 08/10/15

726 Reputación

1 Guía escrita

Equipo

IUPUI, Team 1-3, Hagerty Fall 2015 Miembro de IUPUI, Team 1-3, Hagerty Fall 2015

IUPUI-HAGERTY-F15S1G3

5 Miembros

6 Guías creadas

6 comentarios

does the cb30-b-103 battery also work with the cb30-b-104 series?

henrikahlberg94 - Contestar

I had four screws holding down battery.

When re-installing cover, don’t get confused. There are two holes under rubber feet on side CLOSEST TO HINGES. These do not accept the two screws - put them on side AWAY FROM HINGES.

Bill Brasier - Contestar

Good instructions, my chrome is back to normal again .

Alexander Slaven - Contestar

Many thanks but now there’s no curser! What do I do?

Chris in UK

Chris Tighe - Contestar

Thank you, easy to follow, works like a dream

steve smith - Contestar

No cursor here either. Did Chris in UK get an answer?

laurasan464 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 12

Ultimos 30 días: 38

Todo El Tiempo: 27,497