Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Follow this guide to remove and replace the battery for the TI-30-XB

  1. Remove the 6 screws on the back. Remove the 6 screws on the back.
    • Remove the 6 screws on the back.

  2. Remove the 2 screws holding the battery Eject the battery Eject the battery
    • Remove the 2 screws holding the battery

    • Eject the battery

  3. Make sure you put back in the correct battery! Check the old battery's type/ code and buy such one. Never buy a different type of battery. Put the new battery in.
    • Make sure you put back in the correct battery! Check the old battery's type/ code and buy such one. Never buy a different type of battery.

    • Put the new battery in.

  4. Replace the back plate and screw the 6 screws back in. Replace the back plate and screw the 6 screws back in. Replace the back plate and screw the 6 screws back in.
    • Replace the back plate and screw the 6 screws back in.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Jordan Dann

Miembro Desde 31/10/16

208 Reputación

1 Guía escrita

Equipo

Kid fixers Miembro de Kid fixers

Community

117 Miembros

78 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 16

Ultimos 30 días: 58

Todo El Tiempo: 983