Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Shark Rotator Powered Lift-Away Head Nozzle Disassembly

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Introducción

This disassembly is necessary to remove multiple features such as the brush, the brush belt, and the headlights.

Qué necesitas

  1. Shark Rotator Powered Lift-Away Head Nozzle Disassembly, Shark Rotator Powered Lift-Away Head Nozzle Disassembly: paso 1, imagen 1 de 2 Shark Rotator Powered Lift-Away Head Nozzle Disassembly, Shark Rotator Powered Lift-Away Head Nozzle Disassembly: paso 1, imagen 2 de 2

    • Push lift away button and pull the handle up to separate the body from the wand section.

    Traducir

  2. Shark Rotator Powered Lift-Away Head Nozzle Disassembly: paso 2, imagen 1 de 1

    • Push lift away button on the wand then lift up on the top section to separate.

    Traducir

  3. Shark Rotator Powered Lift-Away Head Nozzle Disassembly: paso 3, imagen 1 de 2 Shark Rotator Powered Lift-Away Head Nozzle Disassembly: paso 3, imagen 2 de 2

    • Tilt the wand shaft backwards for convenient.

    Traducir

  5. Shark Rotator Powered Lift-Away Head Nozzle Disassembly: paso 4, imagen 1 de 2 Shark Rotator Powered Lift-Away Head Nozzle Disassembly: paso 4, imagen 2 de 2

    • Lay the head nozzle piece upside down.

    • Locate and rotate the three gray taps to the unlock position.

    Traducir

  6. Shark Rotator Powered Lift-Away Head Nozzle Disassembly: paso 5, imagen 1 de 1

    • With your fingers, pry and pull the brush cage open.

    Traducir

  7. Shark Rotator Powered Lift-Away Head Nozzle Disassembly: paso 6, imagen 1 de 2 Shark Rotator Powered Lift-Away Head Nozzle Disassembly: paso 6, imagen 2 de 2

    • Remove the 13 screws (circled in yellow) using a phillips screwdriver.

    • Be sure to keep track of which screws go into which hole.

    • Remove the one screw (circled in red) that has a Torx head.

    • The Torx screw is hidden under a rubber gasket. Carefully, lift up the gasket without damaging it to access this screw.

    Traducir

  8. Shark Rotator Powered Lift-Away Head Nozzle Disassembly: paso 7, imagen 1 de 1

    • Lift up the top cover now that all of the screws have been removed.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 7 otros colaboradores

Dan lee

Miembro Desde 09/27/17

101 Reputación

1 Guía escrita

Insignias: 4

+1 mas insignia

Equipo

Cal Poly, Team S9-G3, Banghart Fall 2017 Miembro de Cal Poly, Team S9-G3, Banghart Fall 2017

CPSU-BANGHART-F17S9G3

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 67