Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Shark Flex DuoClean Power Cord Replacement

Qué necesitas

  1. Shark Flex DuoClean Power Cord Replacement, Dust Cup: paso 1, imagen 1 de 2 Shark Flex DuoClean Power Cord Replacement, Dust Cup: paso 1, imagen 2 de 2
    • Squeeze Dust Cup release buttons on either side of the component.

    • Pull up to release Dust Cup.

  2. Shark Flex DuoClean Power Cord Replacement, Power Cord: paso 2, imagen 1 de 2 Shark Flex DuoClean Power Cord Replacement, Power Cord: paso 2, imagen 2 de 2
    • Remove the pre-motor filter with your hands.

  3. Shark Flex DuoClean Power Cord Replacement: paso 3, imagen 1 de 1
    • Remove the post-motor filter.

  4. Shark Flex DuoClean Power Cord Replacement: paso 4, imagen 1 de 1
    • Remove the two 15 mm screws by twisting counterclockwise with the T10 Torx screwdriver.

  5. Shark Flex DuoClean Power Cord Replacement: paso 5, imagen 1 de 2 Shark Flex DuoClean Power Cord Replacement: paso 5, imagen 2 de 2
    • Remove the two 12 mm screws by twisting counterclockwise with the T15 Torx screwdriver.

    • To fully remove the power cord, cut the wires using a wire cutter.

    • For reassembly, use the soldering guide in the Introduction.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

caoimhe

Miembro Desde 10/08/18

979 Reputación

4 Guías creadas

Equipo

Cal Poly, Team S17-G5, White Fall 2018 Miembro de Cal Poly, Team S17-G5, White Fall 2018

CPSU-WHITE-F18S17G5

4 Miembros

14 Guías creadas

Un comentario

I found with further dissasembly, uncrimping and recrimping the wiring loom saved having to add more connections.

qwazew - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 9

Ultimos 30 días: 27

Todo El Tiempo: 1,396