Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Squeeze Dust Cup release buttons on either side of the component.
-
Pull up to release Dust Cup.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 15 mm screws by twisting counterclockwise with the T10 Torx screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 12 mm screws by twisting counterclockwise with the T15 Torx screwdriver.
-
To fully remove the power cord, cut the wires using a wire cutter.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.