Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the rubber feet at every corner of the laptop back panel. Use the ifixit prying tool, and break the adhesive between the rubber feet, and the case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #0 screwdriver to remove the ten 0.2mm screws from the bottom cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Find an opening on the back of the laptop. Use the plastic prying tool to help pry open the back panel of the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the AUX and USB port on the left side of the laptop.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the one 0.1mm screw using a Phillips #0 Screwdriver from the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic prying tool to remove the top connector of the port from the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the second connector from the motherboard using the prying tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Find an opening on the side of the port and pry the USB and AUX port out of the laptop with the prying tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove and place the port outside of the laptop. You are free to install your new USB and HDMI ports.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using your Phillips #0 Screwdriver, unscrew the 0.1mm screws securing the memory card in place at the top.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using both hands, gently lift the card out of its socket in the direction away from yourself.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Replace the the card with a new compatible memory card.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.