Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Samsung SCV-VLUUST50 Screen Replacement

Introducción

Is your screen broken or faulty? This guide will help you replace it.

Qué necesitas

  1. Samsung SCV-VLUUST50 Screen Replacement, Cover: paso 1, imagen 1 de 3 Samsung SCV-VLUUST50 Screen Replacement, Cover: paso 1, imagen 2 de 3 Samsung SCV-VLUUST50 Screen Replacement, Cover: paso 1, imagen 3 de 3

    • Unscrew all visible screws indicated by red circles with a #00 Phillips driver.

    • Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.

    Traducir

  2. Samsung SCV-VLUUST50 Screen Replacement: paso 2, imagen 1 de 3 Samsung SCV-VLUUST50 Screen Replacement: paso 2, imagen 2 de 3 Samsung SCV-VLUUST50 Screen Replacement: paso 2, imagen 3 de 3

    • Remove the flat side panel by applying gentle pressure toward the bottom of the camera.

    • Remove the corner panel by applying pressure away from the shutter button.

    • The memory card cover will come off with the corner panel.

    • Remove the top panel by applying gentle pressure away from the shutter button.

    Traducir

  4. Samsung SCV-VLUUST50 Screen Replacement: paso 3, imagen 1 de 1

    • Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.

    Traducir

  5. Samsung SCV-VLUUST50 Screen Replacement: paso 4, imagen 1 de 2 Samsung SCV-VLUUST50 Screen Replacement: paso 4, imagen 2 de 2

    • Remove the front and back covers by pulling them straight apart.

    Traducir

  6. Samsung SCV-VLUUST50 Screen Replacement, Screen: paso 5, imagen 1 de 3 Samsung SCV-VLUUST50 Screen Replacement, Screen: paso 5, imagen 2 de 3 Samsung SCV-VLUUST50 Screen Replacement, Screen: paso 5, imagen 3 de 3

    • Open the ribbon connector with your fingernail.

    • Pull the ribbon out of the connection.

    Traducir

  7. Samsung SCV-VLUUST50 Screen Replacement: paso 6, imagen 1 de 1

    • Pull the ribbon connected to the screen out from behind the button circuitry on the rear of the camera.

    • Feed the new screen's ribbon through the same slot it came out of.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 97