Esta traducción podría no reflejar los cambios más recientes añadidos a la guía de referencia. Ayúdanos a actualizar la traducción o revisa la guía original.
Introducción
S5830, S5830i - how to disassemble and change / replace the loudspeaker, earpiece, main camera, LCD Display, Touch screen Digitizer Glass, etc.
Qué necesitas
Resumen del Video
-
Este paso está sin traducir. Ayuda a traducirlo
-
Switch off the phone.
-
Remove the battery and any installed SIM and memory card.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 7 Phillips screws.
-
Use a plastic tool to remove the back cover.
-
vibrating motor
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the earpiece & light sensor flex cable.
-
Take off the Volume Up/Down buttons flex cable.
-
Do the same with the Power button flex cable.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the microphone.
-
Lift the board from the right side and disconnect the LCD display flex cable.
-
Remove the board from the middle frame.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
This is the loudspeaker & audio jack connector module.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a hair dryer and warm the touch screen glass to make adhesive soften.
-
Use a plastic tool for separating the glass from the middle frame.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Again by using a plastic tool, separate the LCD display from the middle frame.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Install the touch screen and start with reassembling.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
23 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
23%
¡ Miguel Luna nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›