Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Use this guide to replace the back cover of your Galaxy A3 (2016).

  1. Start by switching off your phone. Take an iOpener to heat up and soften the glue behind the back cover. Lift the bottom part of your back cover with a suction handle and insert an opening pick.
    • Start by switching off your phone.

    • Take an iOpener to heat up and soften the glue behind the back cover.

    • Lift the bottom part of your back cover with a suction handle and insert an opening pick.

  2. Slide the opening pick up to the rear camera to separate the back cover from the frame. Slide the opening pick up to the rear camera to separate the back cover from the frame. Slide the opening pick up to the rear camera to separate the back cover from the frame.
    • Slide the opening pick up to the rear camera to separate the back cover from the frame.

  3. ABRIR TODAS LAS PESTAÑAS

    Kits de actualización de RAM para Mac

    Compra kits

    Suficiente RAM
    para todas las pestañas

    Compra kits
  4. Insert a second opening pick and move around the other corner at the bottom part of the back cover. Insert a second opening pick and move around the other corner at the bottom part of the back cover.
    • Insert a second opening pick and move around the other corner at the bottom part of the back cover.

  5. Move the second pick along the left side of the back cover to loosen the adhesive. Move around the upper left corner and loosen the adhesive above the rear camera. After loosening all the edges and sides of the back cover use an iOpener to loosen the adhesive underneath the center of it.
    • Move the second pick along the left side of the back cover to loosen the adhesive.

    • Move around the upper left corner and loosen the adhesive above the rear camera.

    • After loosening all the edges and sides of the back cover use an iOpener to loosen the adhesive underneath the center of it.

  6. Insert a plastic card at the bottom and slide it underneath the back cover. Separate the glue until you reach the rear camera. Now you can slowly lift up the back cover and finally remove it.
    • Insert a plastic card at the bottom and slide it underneath the back cover.

    • Separate the glue until you reach the rear camera.

    • Now you can slowly lift up the back cover and finally remove it.

Conclusión

To reassemble your device, follow these instructions in reverse order.

15 personas más completaron esta guía.

Dominik Schnabelrauch

Miembro Desde 23/11/16

69,097 Reputación

312 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

130 Miembros

12,512 Guías creadas

where can I buy the back cover? tnx

rompecolleoni - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 9

Ultimos 7 días: 34

Ultimos 30 días: 178

Todo El Tiempo: 11,162