Repara tus cosas Comunidad Tienda

SONY Alpha NEX-3N Flash Assembly Replacement

Qué necesitas

  1. SONY Alpha NEX-3N Flash Assembly Replacement, Getting Started: paso 1, imagen 1 de 2 SONY Alpha NEX-3N Flash Assembly Replacement, Getting Started: paso 1, imagen 2 de 2

    • Remove battery and card

    Editar

  2. SONY Alpha NEX-3N Flash Assembly Replacement, Back Case 1: paso 2, imagen 1 de 3 SONY Alpha NEX-3N Flash Assembly Replacement, Back Case 1: paso 2, imagen 2 de 3 SONY Alpha NEX-3N Flash Assembly Replacement, Back Case 1: paso 2, imagen 3 de 3

    • Right side, remove 1 M1.4x3.7 screw

    • Left side, remove 3 M1.4x3.7 screws

    • Bottom side, remove 5 M1.4x3.7 screws, including 2 in battery bay. 2 of them out of this photo, you can find them.

    • Do NOT touch screws on the bottom of LCD assembly.

    Editar

  3. SONY Alpha NEX-3N Flash Assembly Replacement, Back Case 2: paso 3, imagen 1 de 1

    • Pop the flash.

    • In flash room, remove 1 (one) M1.4x3.8 black screw.

    Editar

  4. SONY Alpha NEX-3N Flash Assembly Replacement, Back Case 3: paso 4, imagen 1 de 3 SONY Alpha NEX-3N Flash Assembly Replacement, Back Case 3: paso 4, imagen 2 de 3 SONY Alpha NEX-3N Flash Assembly Replacement, Back Case 3: paso 4, imagen 3 de 3

    • Remove LCD hinge cover, by sliding to the left.

    • Remove back cover, actually just a plastic frame.

    Editar

  6. SONY Alpha NEX-3N Flash Assembly Replacement, LCD assembly: paso 5, imagen 1 de 2 SONY Alpha NEX-3N Flash Assembly Replacement, LCD assembly: paso 5, imagen 2 de 2

    • Remove 1 M1.4x2 screw

    • Remove another M1.4x2 screw, sorry for the angle.

    Editar

  7. SONY Alpha NEX-3N Flash Assembly Replacement, LCD Assembly: paso 6, imagen 1 de 3 SONY Alpha NEX-3N Flash Assembly Replacement, LCD Assembly: paso 6, imagen 2 de 3 SONY Alpha NEX-3N Flash Assembly Replacement, LCD Assembly: paso 6, imagen 3 de 3

    • CAUTION. Sony makes world's MOST BRITTLE FPC!

    • Loosen LCD assemble with caution!

    • Release FPC cable, the connector is flip type.

    Editar

  8. SONY Alpha NEX-3N Flash Assembly Replacement, The LCD assembly: paso 7, imagen 1 de 1

    • The LCD assembly

    Editar

  9. SONY Alpha NEX-3N Flash Assembly Replacement, Screws: paso 8, imagen 1 de 1

    • Remove 3 M1.4x3.6 black screws, 2 of them out of focus

    Editar

  10. SONY Alpha NEX-3N Flash Assembly Replacement: paso 9, imagen 1 de 2 SONY Alpha NEX-3N Flash Assembly Replacement: paso 9, imagen 2 de 2

    • Slide the flash assembly backwards with caution.

    • Detach flash FPC by pulling it out of the socket.

    • High Voltage! Do NOT touch metal on FPC.

    • Then remove the flash assembly.

    Editar

  11. SONY Alpha NEX-3N Flash Assembly Replacement: paso 10, imagen 1 de 1

    • Remove that part whatever called, by sliding it backwards.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Terrance

Miembro Desde 11/17/09

6,368 Reputación

17 Guías creadas

Insignias: 22

+ 19 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 20

Todo El Tiempo: 271