Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Torx T10 screw driver to unscrew all ten 13.5 mm screws from the drill casing to gain access to the interior.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently lift the casing from the drill body.
-
Take the casing completely off the drill body to gain access to the interior of the drill.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Rotate the Drill 180 degrees so that the top is facing you.
-
Lift the level gauge out from the top corner of the drill.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the gear switch upwards from the top of the drill head.
-