Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the top of the zipper on the side with the slider.
-
Peel back any fabric that is covering the zipper stop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully remove any remaining pieces of the stop using tweezers.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slide the damaged zipper slider up and off of the zipper.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Grab a new zipper stop.
-
Insert the teeth into the webbing in the same place where the old stop was located.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use pliers to bend the metal top of the zipper stop around the edge of the webbing, poking the single tooth on the stop through the backside of the webbing.
-
Crimp the stop into place.
-
Cancelar: No complete esta guía.
19 personas más completaron esta guía.
11 comentarios
Where do I get the zipper stop????
How do you find the size slider(in my case 5 millimetres) and also the right size teeth that will fit into the zipper.
I used this Guide to replace the zipper slide on my wife's favorite Disney fleece jacket. I purchased my slide and the stop online. Since I'm not sure about the rules on posting vendor's info, I will say GOOGLE "nylon coil zipper slide". You can have your "zippershipped" right to your door.
Great now how ! thank’s :)
