Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 6 outer screws on the underside of the laptop.
-
Open the battery compartment and remove the 7 visible screws.
-
Pry the corners of the bezel at the base of the keyboard, pushing up until it loosens.
-
Carefully remove the ribbon connections of the keyboard, power button, and wifi button.
-
Disconnect and re-connect the white monitor ribbon located on the left side to make sure it sits firmly in the connection.
-
Reassemble the laptop by following these steps in reverse.
-
The monitor should work when powered on again.
-
-
Cancelar: No complete esta guía.
9 personas más completaron esta guía.