Introducción
Sigue estas instrucciones para reemplazar la batería de uno de sus auriculares Samsung Galaxy Buds. Las imágenes de este tutorial muestran un auricular derecho, pero el procedimiento es el mismo para ambos.
Los Galaxy Buds son impermeables certificados IPX2, por lo que tienen protección de resistencia al agua. Después de esta reparación, serán un poco menos resistentes, así que no transpires mucho.
Qué necesitas
-
-
Empieza por quitar la punta de goma del auricular:
-
Sujeta la punta (donde está la etiqueta "R") y tira suavemente de ella hacia arriba mientras la sacas del auricular.
-
-
-
Coloca el auricular horizontalmente en un tornillo de banco con protección de goma o un par de alicates sin filo.
-
Aplica presión constante y uniforme a cada lado del auricular a lo largo de la articulación principal de la carcasa (la articulación indicada por las dos flechas). La presión debería abrirlo.
You can avoid vise-marks if you use a plastic opening tool, I was able to do it pretty easily. First I applied pressure with my fingernail which created a slight rift, at which point I realized I had a plastic opening tool, so I was able to use that to pry the halves apart, and hold the small opening with my fingernail while I ran the plastic opening tool along the rest of the seam.
-
-
-
Una vez que hayas abierto un espacio entre las dos mitades del auricular, sepáralas suavemente con una herramienta de apertura de plástico.
-
Es posible que necesites progresar gradualmente alrededor del auricular con la herramienta. Tómate tu tiempo y haz todo lo posible para no deformar el plástico.
-
Retira con cuidado la mitad superior del auricular.
-
-
-
-
Usa una herramienta de plástico para abrir la tapa en forma de media luna en la parte superior de la carcasa de la batería.
Hi...
My galaxy buds two pro having issue its damaged by some heavy objest fell one thats buds..now its not working coud you please help me to solve that
-
-
-
La parte inferior de la carcasa de la batería tiene orificios que le permiten empujar la batería hacia afuera. El lado plano de un spudger encaja perfectamente a través de la abertura más ancha, marcada aquí en rojo.
-
Inserta el extremo plano de un spudger (o de otra herramienta de plástico) en la parte inferior de la carcasa de la batería y empuje la batería hacia fuera por el otro lado.
-
-
-
Retira la batería de su carcasa.
Gracias por la información, me gustaría saber en donde se consiguen esas baterías, gracias
My right side shows it's charging but doesn't power on is it a touch issue or battery
-
Para volver a ensamblar tu dispositivo, sigue los pasos anteriores en orden inverso. Utiliza la cinta Tesa para volver a pegar las piezas en las que el adhesivo original ya no sea suficiente.
Para un rendimiento óptimo, calibra tu nueva batería: cárgala al 100% y déjala cargar durante al menos dos horas más. A continuación, utiliza los auriculares hasta que la batería se agote y se apaguen. Por último, recárgalos al 100% sin interrupción.
Lleva tus desechos electrónicos a un [E-Waste|centro de reciclaje certificado|new_window=true]].
¿La reparación no salió según lo planeado? Visita nuestracomunidad de respuestas para obtener ayuda con el diagnóstico.
Para volver a ensamblar tu dispositivo, sigue los pasos anteriores en orden inverso. Utiliza la cinta Tesa para volver a pegar las piezas en las que el adhesivo original ya no sea suficiente.
Para un rendimiento óptimo, calibra tu nueva batería: cárgala al 100% y déjala cargar durante al menos dos horas más. A continuación, utiliza los auriculares hasta que la batería se agote y se apaguen. Por último, recárgalos al 100% sin interrupción.
Lleva tus desechos electrónicos a un [E-Waste|centro de reciclaje certificado|new_window=true]].
¿La reparación no salió según lo planeado? Visita nuestracomunidad de respuestas para obtener ayuda con el diagnóstico.
Cancelar: No complete esta guía.
38 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
¡ Mariana Roca nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
20 comentarios
How to fix not working mic on my galaxy bud
Requiere un cambio de pieza electronica correspondiente al microfono, ya que pudo haberse mojado
My Galaxy buds had the newer CP1254 A3 battery. My Buds were purchased new in August 2019.
My earbuds touchpad is not working after take shower , can you help how can i repair it
Where can I buy a replacement battery in Cape Town South Africa . Its a varta 3.7 v coin battery
With step 8 be careful because the plastic is VERY thin and easy to bend but apart from that it is very easy to do and well worth a try.
Excelente explicación, pude cambiar la batería de mis audífonos.
is the battery CP1254 and LIR1254 interchangeable? Notice the screenshot of the repair guide is CP1254 with 3.7v and the replacement battery in the part list is LIR1254 that’s 3.6v.
Hi CK,
Yes, the two are interchangeable! CP most likely stands for Varta's "Coin Power®" name, while LIR likely stands for a more generic "Lithium Ion Rechargeable".
In case if anyone run into the same issue as I did. After I replaced the battery, the touch control and mic wasn't working until I went to the Galaxy Wearable app and reset the earbud. Also, on the Galaxy Bud+, you don't need to open up the earbud like in this instruction. You can quite easily pry it open with your finger nails.
Hi Patrick, I noticed you have the Galaxy Bud + I have these too, did you use the LIR1254 battery in this? I noticed some steps were a little different but I cannot seem to source a CP1454 battery to replace the earbud and was hoping the LIR 1254 will work in it's place?
Sabrina -
Worked great, thanks a lot. I had the feeling it went even easier with the Galaxy Bud+.
@arthurshi Hey Arthur, I ordered LIR1254H battery but when I got to the battery inside the earbud it was a Varta CP1454 A3... I'm waiting for the LIR1254 to be delivered, but will this work? Should I try it? I don't want to fry the earbud
What is the correct charging voltage and battery model number for the Galaxy Live Buds? I bought an extra pair that were sitting for an extended time (couple of years in an unopened box) went to give them to my GF when her other buds died and I cannot get the brand new never previously used or opened buds to charge because they must be in a LVC (low voltage cutoff state).
Thoughts?