Saltar al contenido principal
  1. Remove these two  2.5mm Phillip's head screws before attempting to remove the screen from the device. Remove these two  2.5mm Phillip's head screws before attempting to remove the screen from the device.
    • Remove these two 2.5mm Phillip's head screws before attempting to remove the screen from the device.

  2. Run an opening pick around the edge of the screen to loosen it and begin to pry upward. When the screen comes up like it has in the photo, it should be able to simply be removed from its casing.
    • Run an opening pick around the edge of the screen to loosen it and begin to pry upward.

    • When the screen comes up like it has in the photo, it should be able to simply be removed from its casing.

    • The buttons on the end of the device will be loose when you remove the screen from the backplate. Be careful not to lose them.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Ryan Williams

Miembro Desde 27/01/15

1,112 Reputación

4 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 1,125