Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
-
Ubique la lengüeta de liberación de la batería en la parte inferior del G4.
-
Deslice la lengüeta de liberación de la batería hacia la izquierda y levante la batería de la computadora.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the seven T8 Torx screws from the lower case.
-
Using your thumbs, slide the lower case toward the front of the computer.
-
The lower case may stick in the front on a tab just above the center of the optical drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.
-
Lift the lower case off.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the large DC-In connector from the right side of the logic board.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the DC-In board out of the computer by pulling up and away from you.
-
If there is a fan present, rotate the DC-In board slightly clockwise before easing it out at a slight angle in order to clear the fan clamp on top of it.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.