Introducción

Install an Airport Extreme 802.11g card internally.

Use a coin to turn the battery locking screw 90 degrees to the right.
  • Use a coin to turn the battery locking screw 90 degrees to the right.

  • Lift the battery out of the computer.

Agregar Comentario

Flip down the door on the right side of the battery compartment.
  • Flip down the door on the right side of the battery compartment.

Agregar Comentario

  • Use a spudger to disconnect the Airport antenna from the card.

Agregar Comentario

  • Grasp the plastic tab and pull the card out all the way.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

11 personas más completaron esta guía.

Documentos Adjuntos

iRobot

Miembro Desde 24/09/09

1 Reputación

774 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 5

Todo El Tiempo: 10,334