Repara tus cosas Comunidad Tienda

PlayStation 2 Slimline SCPH-900xx Power Supply Replacement

Introducción

Follow this guide to replace the power supply on your PlayStation 2 Slimline.

Qué necesitas

  1. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Lower Smart Plate: paso 1, imagen 1 de 1

    • Turn off your PlayStation 2 and remove the disc and Memory Card.

    • Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel).

    Traducir

  2. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: paso 2, imagen 1 de 1

    • Locate the six covers.

    • Two are located underneath the feet.

    • One cover is located underneath the Void sticker.

    Traducir

  3. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: paso 3, imagen 1 de 1

    • Remove the Void sticker with a Spudger and some cleaning alcohol

    • Removing the Void sticker will void the warranty of your device!

    • Some versions of that console maybe don’t have the sticker or it’s relocated.

    Traducir

  5. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: paso 4, imagen 1 de 2 PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: paso 4, imagen 2 de 2

    • Remove the covers by using either a Spudger, Opening Picks or your fingernail.

    Traducir

  6. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: paso 5, imagen 1 de 1

    • Remove the six Phillips #1 screws with a screwdriver.

    • The screws on the right are a bit deeper inside the shell as like the rest but are the same size.

    Traducir

  7. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: paso 6, imagen 1 de 2 PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: paso 6, imagen 2 de 2

    • Separate the clips at the front and the overhanging side from their mounting using a Prying Tool.

    • Separate the two halves.

    Traducir

  8. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Power Supply: paso 7, imagen 1 de 1

    • Remove the Phillips screw from the power supply.

    Traducir

  9. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: paso 8, imagen 1 de 1

    • Remove the power supply connector from the motherboard.

    • To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket.

    Traducir

    • Lift the power supply straight up and out of the PS2.

    Traducir
Conclusión

To reassemble your device, follow the above steps in reverse order.

2 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

de en

100%

MrJulian

shingle

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Autor

con 1 otro colaborador

MrJulian

Miembro Desde 10/22/20

1,543 Reputación

7 Guías creadas

Insignias: 18

+ 15 más insignias

Un comentario

I remember i was open the PS2 for cleaning but when i cleaning the power supply, my sister plugged it than I got an electric shock. 🤣🤣🤣

Memozit - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 13

Ultimos 30 días: 89

Todo El Tiempo: 669