Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Directions are given as if you were holding the camera to take a picture.
Qué necesitas
-
-
Locate the memory card and battery card latch on the bottom of the camera.
-
Slide the latch to the open position.
-
-
-
-
Using a size #00 Phillips screwdriver, remove the three 4.58 mm screws on the bottom of the camera.
-
Use this screwdriver for all screws in the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.