Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the memory card and battery card latch on the bottom of the camera.
-
Slide the latch to the open position.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Open the battery latch, and slide the battery release lever to the right.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the three 4.6 mm screws on the bottom of the camera using a Phillips #00 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the single 3.2 mm screw on the left side of the camera using a Phillips #00 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 3.2 mm screws on the right side of the camera using a Phillips #00 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently remove the back casing.
-
Start at the bottom and carefully pry towards the top to get this piece free.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.