Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the battery cover by pressing on the small rectangular button located on the back of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the stylus in order to access the screw.
-
Remove the 27mm top-left screw using a T6 Torx screwdriver.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the spudger, remove the rubber rectangular cover located in the upper rear, right-hand corner.
-
Remove the 27mm screw using the T6 Torx screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the remaining two 27mm screws from the bottom using the T6 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the phone so the screen is facing the right side.
-
Use a spudger to carefully separate the back panel from the front panel to access components inside the phone.
-
Separate the covers from the left side of the device as indicated in the picture.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Tweezers$4.99-
Using a pair of tweezers, grasp the blue rubber microphone.
-
Pull the rubber microphone up and back to remove it.
-
Now you have successfully removed the microphone.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.