Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

PSP 300x Motherboard Replacement

Introducción

Steps for removing the motherboard of a Sony PSP-3000

Qué necesitas

  1. PSP 300x Motherboard Replacement, Battery: paso 1, imagen 1 de 3 PSP 300x Motherboard Replacement, Battery: paso 1, imagen 2 de 3 PSP 300x Motherboard Replacement, Battery: paso 1, imagen 3 de 3

    • Place the PSP face down and locate the battery cover on the left side of the device.

    • Lift and remove the battery cover to reveal the battery.

    • Remove the battery.

    Traducir

  2. PSP 300x Motherboard Replacement, Casing: paso 2, imagen 1 de 1

    • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

    Traducir

  3. PSP 300x Motherboard Replacement: paso 3, imagen 1 de 2 PSP 300x Motherboard Replacement: paso 3, imagen 2 de 2

    • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

    • Two are located behind the battery's warranty sticker.

    • Two are located on the right side of the PSP.

    Traducir

  4. PSP 300x Motherboard Replacement: paso 4, imagen 1 de 1

    • Next, unscrew the two screws located at the top of the PSP.

    Traducir

  5. PSP 300x Motherboard Replacement: paso 5, imagen 1 de 1

    • Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

    Traducir

  6. PSP 300x Motherboard Replacement: paso 6, imagen 1 de 2 PSP 300x Motherboard Replacement: paso 6, imagen 2 de 2

    • Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing.


    • Remove the front casing completely.

    Traducir

  7. PSP 300x Motherboard Replacement, LCD Screen: paso 7, imagen 1 de 2 PSP 300x Motherboard Replacement, LCD Screen: paso 7, imagen 2 de 2

    • Push the homebar to the right to release the tab located on the right side of the LCD screen.

    • DO NOT completely remove the homebar, as it is still connected by ribbon cables.

    Traducir

  8. PSP 300x Motherboard Replacement: paso 8, imagen 1 de 3 PSP 300x Motherboard Replacement: paso 8, imagen 2 de 3 PSP 300x Motherboard Replacement: paso 8, imagen 3 de 3

    • Slowly lift the LCD screen off the PSP starting at the top edge corner.

    • Again, the LCD screen is attached by ribbon cables, so do not remove it completely.

    • Orientation of PSP is flipped in photo.

    Traducir

  9. PSP 300x Motherboard Replacement: paso 9, imagen 1 de 2 PSP 300x Motherboard Replacement: paso 9, imagen 2 de 2

    • Flip the small brown locks on the four ribbon cable connectors up using a spudger or fingernail.

    • Pull all four ribbon cables out.

    • Now remove the LCD screen and homebar from the PSP.

    Traducir

  10. PSP 300x Motherboard Replacement: paso 10, imagen 1 de 1

    • Remove the metal tab that lies above the LCD screen.

    • Upon reassembly, make note that the stamped lettering faces down, and the large tab fits just above the motherboard to the right hand side of the left trigger.

    Traducir

  11. PSP 300x Motherboard Replacement, Trigger Buttons: paso 11, imagen 1 de 1

    • Remove the screw securing 'L' trigger to the PSP.

    Traducir

  12. PSP 300x Motherboard Replacement: paso 12, imagen 1 de 1

    • Remove the white plastic piece that holds the 'L' trigger in place.

    Traducir

  13. PSP 300x Motherboard Replacement: paso 13, imagen 1 de 1

    • Remove the 'L' trigger from the PSP.

    Traducir

  15. PSP 300x Motherboard Replacement: paso 14, imagen 1 de 1

    • Remove the screw securing the 'R' trigger.

    Traducir

  16. PSP 300x Motherboard Replacement: paso 15, imagen 1 de 1

    • Remove the white plastic piece that holds the 'R' trigger in place.

    Traducir

  17. PSP 300x Motherboard Replacement: paso 16, imagen 1 de 1

    • Remove the 'R' trigger from the PSP.

    Traducir

  18. PSP 300x Motherboard Replacement, Analog Stick: paso 17, imagen 1 de 1

    • Remove the screw from the bottom left edge of the PSP.

    Traducir

  19. PSP 300x Motherboard Replacement: paso 18, imagen 1 de 1

    • Being careful not to break the ribbon cable, use the spudger to peel the adhesive button of the the 'L' trigger off the PSP.

    Traducir

  20. PSP 300x Motherboard Replacement: paso 19, imagen 1 de 2 PSP 300x Motherboard Replacement: paso 19, imagen 2 de 2

    • Using a fingernail or spudger, flip up the retaining bracket on the d-pad and 'L' trigger ribbon cable.

    • Lift the black plastic bracket along with the d-pad contact pad, disconnecting the ribbon cable as you lift.

    Traducir

  21. PSP 300x Motherboard Replacement: paso 20, imagen 1 de 1

    • Remove the cable from the connector and remove the entire black piece from the PSP.

    Traducir

  22. PSP 300x Motherboard Replacement: paso 21, imagen 1 de 1

    • Remove the screw holding the analog stick in place.

    Traducir

  23. PSP 300x Motherboard Replacement: paso 22, imagen 1 de 2 PSP 300x Motherboard Replacement: paso 22, imagen 2 de 2

    • Flip up the lock on the analog sticks ribbon cable.

    • Remove the analog stick from the PSP.

    Traducir

  24. PSP 300x Motherboard Replacement, Button Pad: paso 23, imagen 1 de 1

    • After removing the LCD Screen, the Button Pad should be easy to remove.

    Traducir

  25. PSP 300x Motherboard Replacement, Power Jack: paso 24, imagen 1 de 1

    • Flip up the lock and detach the ribbon cable above the power jack.

    Traducir

  26. PSP 300x Motherboard Replacement: paso 25, imagen 1 de 1

    • Remove the screw from the power jack.

    Traducir

  27. PSP 300x Motherboard Replacement: paso 26, imagen 1 de 1

    • Carefully bend back the black tab holding the power jack in place and start pulling the jack up to release it from this clip.

    Traducir

  28. PSP 300x Motherboard Replacement: paso 27, imagen 1 de 1

    • Pull the plug connecting the power jack to the motherboard.

    • Remove the power jack.

    Traducir

  29. PSP 300x Motherboard Replacement, Speaker: paso 28, imagen 1 de 2 PSP 300x Motherboard Replacement, Speaker: paso 28, imagen 2 de 2

    • Push the black tab at the bottom of the speaker to pop the speaker out of place, and remove the speaker.

    • The speaker is spring loaded, so be sure to keep an eye on it in case it starts doing flips into the air when you push the tab. Be careful not to lose or damage it!

    • Make sure the new/replacement speaker does not spring out during reassembly.

    Traducir

  30. PSP 300x Motherboard Replacement, Motherboard: paso 29, imagen 1 de 1

    • Unplug the wireless cable.

    Traducir

  31. PSP 300x Motherboard Replacement: paso 30, imagen 1 de 1

    • Flip up the locks and remove the two ribbon cables shown.

    Traducir

  32. PSP 300x Motherboard Replacement: paso 31, imagen 1 de 1

    • Flip up the lock and remove one last ribbon cable from the bottom edge of the PSP.

    Traducir

  33. PSP 300x Motherboard Replacement: paso 32, imagen 1 de 1

    • Remove the screw from the bottom left corner of the PSP.

    Traducir

  34. PSP 300x Motherboard Replacement, Remove Power Switch Panel: paso 33, imagen 1 de 3 PSP 300x Motherboard Replacement, Remove Power Switch Panel: paso 33, imagen 2 de 3 PSP 300x Motherboard Replacement, Remove Power Switch Panel: paso 33, imagen 3 de 3

    • Remove the screw from the top of the power switch panel. Gently remove panel from pegs starting from switch side.

    Traducir

  35. PSP 300x Motherboard Replacement: paso 34, imagen 1 de 1

    • Lift the silver rim on the right side of the PSP up and off.

    Traducir

  36. PSP 300x Motherboard Replacement: paso 35, imagen 1 de 1

    • Lift the silver rim on the left side of the PSP up and off.

    Traducir

  37. PSP 300x Motherboard Replacement: paso 36, imagen 1 de 1

    • Lift the motherboard up slowly starting from the bottom of the PSP, being careful not to damage the port on top.

    Traducir

  38. PSP 300x Motherboard Replacement: paso 37, imagen 1 de 2 PSP 300x Motherboard Replacement: paso 37, imagen 2 de 2

    • Pull the motherboard out and remove it from the PSP.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

15 personas más completaron esta guía.

Autor

con 15 otros colaboradores

mbnewsom

Miembro Desde 10/28/09

3,103 Reputación

11 Guías creadas

Insignias: 15

+ 12 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 8

Ultimos 7 días: 61

Ultimos 30 días: 352

Todo El Tiempo: 43,625