Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This repair is challenging because the wire that acts as the spring is difficult to bend into the correct shape.
Qué necesitas
-
-
Using the Phillips-head #2 screwdriver, unscrew the three 1cm Phillips-head screws on the plastic base of the toaster to separate the outer metal shell from the plastic base.
-
-
-
-
Press down on the toaster handle to access to the grabber spring located behind the large metal plate.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.