Optoma HD72 Upper Case Replacement

Introducción

Use this guide to replace the upper case on an Optoma HD72 projector.

Use a Phillips screwdriver to remove the five 2 mm screws on the underside of the device.

Flip the device over and slightly lift the upper case, with care not to strain the two cables.
Disconnect the two cables that connect the top case to the motherboard.
Lift the upper case up and off.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Miembro Desde 03/29/22

8,140 Reputación

42 Guías creadas

Staff

141 Miembros

17,873 Guías creadas