Saltar al contenido principal

Introducción

This guide is a prerequisite to removing the upper LCD, speakers, Wi-Fi antenna, and cameras.

Partes

No se especificaron partes.

  1. Remove the 3D adjustment switch from the front display bezel.
    • Remove the 3D adjustment switch from the front display bezel.

    • This step is not necessary for disassembly, but the switch is likely to fall out on its own. By removing it yourself, you reduce the chance of losing it.

  2. Skip the upgrade.

    Descuento de $10 en tu factura de $50 con
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  3. Insert a metal probe into the space above the ABXY buttons with the point touching the metal hinge. Push the hinge towards the center of the upper case. This will require a fair amount of force. Before and after images of the hinge location when looking at the back of the upper display are shown.
    • Insert a metal probe into the space above the ABXY buttons with the point touching the metal hinge.

    • Push the hinge towards the center of the upper case. This will require a fair amount of force.

    • Before and after images of the hinge location when looking at the back of the upper display are shown.

  4. Before proceeding, note how the 3 ribbon cables are oriented (what direction the gold contacts face) and layered together (which cable is on top of which). The cables are too short to reach if they are threaded through in any other orientation. Slowly pull the upper display assembly away from the upper case. Make sure that the various ribbon cables are being fed through the slit in the upper case.
    • Before proceeding, note how the 3 ribbon cables are oriented (what direction the gold contacts face) and layered together (which cable is on top of which). The cables are too short to reach if they are threaded through in any other orientation.

    • Slowly pull the upper display assembly away from the upper case.

    • Make sure that the various ribbon cables are being fed through the slit in the upper case.

    • Separate the upper display assembly from the upper case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

David Hodson

Miembro Desde 13/04/10

136,002 Reputación

127 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 178