Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the screws on both sides of the camera.
-
Remove the four 6.3 mm Phillips screws using a PH00 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic opening tool to separate the rear case from the camera.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After, remove the two orange ribbon connectors attached to the interior of the camera with tweezers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the screws from the back assembly with a Phillips (PH00) head screwdriver.
-
Remove the ten 5.3 mm Phillips screws.
-
Remove the three 4.3 mm Phillips screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic opening tool to separate the LCD and metal plates from the casing.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic opening tool to separate the buttons from the casing.
-
Remove the 4.3 mm Phillips screw from the knob using a PH00 screwdriver.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.