Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
With a SIM card eject tool (a paperclip will work as well), push down on the hole at the top of the phone until the SIM card holder releases. This should not take much pressure.
-
Remove the SIM card and the SIM card holder.
-
-
Cancelar: No complete esta guía.
6 personas más completaron esta guía.
2 comentarios
You can try:
Or have one 3D printed. The dual-SIM tray 3D file can be found on GitHub:
https://github.com/JDesignResearch/Nexus...
The person who created that 3D file can be found here: