Repara tus cosas Comunidad Tienda

New Nintendo 3DS Cover Plate Replacement

Escrito Por: ethan2226 (y otro participante)
  • Comentarios: 0
  • Favoritos: 2
  • Terminaciones: 4

Dificultad

Fácil

Pasos

6

Tiempo Requerido

5 minutos

Secciones

1

Banderas

2

Action Shots

Fotos de acción

Sé un héroe de acción! Esta guía necesita imágenes que demuestren mejor cómo llevar a cabo acciones específicas.

Member-Contributed Guide

Guía Contribuida Por Miembros

Un miembro increíble de nuestra comunidad escribió esta guía. No está supervisada por el personal de iFixit.

Introducción

This guide will tell you how to replace the Cover Plates on the New Nintendo 3DS.

  1. Ensure your device is powered off before proceeding. Failure to do so may result in electrical shock or damage to the device.

    • Ensure your device is powered off before proceeding. Failure to do so may result in electrical shock or damage to the device.

    • Place the system on a flat stable surface.

    • The Cover Plates will ONLY work with the New Nintendo 3DS. They are not compatible with New Nintendo 3DS XL or any other Nintendo system.

    Editar

  2. Use a size #0 phillips-head screwdriver to loosen the screws from the back cover plate. The screws are attached to the cover, so they will not come out completely.

    • Use a size #0 phillips-head screwdriver to loosen the screws from the back cover plate. The screws are attached to the cover, so they will not come out completely.

    Editar

  4. Use the nub on the end of the stylus or a plastic opening tool to gently pry on the small slots on each side near the L and R buttons. Once the cover plate begins to separate from the system, gently remove it.

    • Use the nub on the end of the stylus or a plastic opening tool to gently pry on the small slots on each side near the L and R buttons. Once the cover plate begins to separate from the system, gently remove it.

    Editar

  5. Use the nub on the end of the stylus or a plastic opening tool to gently pry on the small slots on each side near the L and R buttons. Once the cover plate begins to separate from the system, gently remove it.

    • Use the nub on the end of the stylus or a plastic opening tool to gently pry on the small slots on each side near the L and R buttons. Once the cover plate begins to separate from the system, gently remove it.

    Editar

  6. Attach the new front cover plate.

    • Attach the new front cover plate.

    Editar

  7. Attach the new back cover plate and tighten the two #0 phillips-head screws.

    • Attach the new back cover plate and tighten the two #0 phillips-head screws.

    Editar
Conclusión

You have changed the cover plates on your New Nintendo 3DS system.

4 personas más completaron esta guía.

Autor

con 1 otro colaborador

ethan2226

Miembro Desde 26/12/15

145 Reputación

1 Guía escrita

Insignias: 8

+ 5 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 23

Ultimos 30 días: 120

Todo El Tiempo: 5,255