Repara tus cosas Comunidad Tienda

Moto C Daughterboard Cover Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Introducción

Remove the daughterboard cover to take out the daughterboard.

Qué necesitas

  1. Moto C Daughterboard Cover Replacement, Back Cover: paso 1, imagen 1 de 3 Moto C Daughterboard Cover Replacement, Back Cover: paso 1, imagen 2 de 3 Moto C Daughterboard Cover Replacement, Back Cover: paso 1, imagen 3 de 3

    • Power off your phone before beginning disassembly.

    • Insert a thumbnail, or spudger, into the notch on the bottom right corner to start separating the phone unit from the back cover.

    • Move it to the bottom left corner and pry the phone unit out of the back cover until you can get a good grip.

    Editar

  2. Moto C Daughterboard Cover Replacement: paso 2, imagen 1 de 2 Moto C Daughterboard Cover Replacement: paso 2, imagen 2 de 2

    • Lift the phone out of the back cover.

    Editar

  4. Moto C Daughterboard Cover Replacement, Battery: paso 3, imagen 1 de 3 Moto C Daughterboard Cover Replacement, Battery: paso 3, imagen 2 de 3 Moto C Daughterboard Cover Replacement, Battery: paso 3, imagen 3 de 3

    • Use a finger or spudger to lever the battery out of its recess and remove it.

    Editar

  5. Moto C Daughterboard Cover Replacement, Daughterboard Cover: paso 4, imagen 1 de 1

    • Remove the four 3.5 mm long Torx T5 screws.

    • Some screws might be covered with stickers.

    Editar

  6. Moto C Daughterboard Cover Replacement: paso 5, imagen 1 de 3 Moto C Daughterboard Cover Replacement: paso 5, imagen 2 de 3 Moto C Daughterboard Cover Replacement: paso 5, imagen 3 de 3

    • Apply the edge of an opening pick to the bottom right corner under the daughterboard cover.

    • Twist the opening pick to open the plastic clamps of the daughterboard cover.

    • Slide the opening pick to the left and pry it upwards until you can get a good grip on the daughterboard cover.

    Editar

  7. Moto C Daughterboard Cover Replacement: paso 6, imagen 1 de 1

    • Remove the daughterboard cover.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Dominik Schnabelrauch

Miembro Desde 11/23/16

205,196 Reputación

682 Guías creadas

Insignias: 40

+ 37 más insignias

Equipo

iFixit Miembro de iFixit

Staff

136 Miembros

17,430 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 11