Introducción

Esta guía le mostrará cómo quitar la puerta de acceso de su computadora portátil.

Herramientas

No se requieren herramientas.

  1. Con el estuche cerrado, coloca el Unibody boca arriba sobre una superficie plana.
    • Con el estuche cerrado, coloca el Unibody boca arriba sobre una superficie plana.

    • Presiona el lado ranurado del pestillo de liberación de la puerta de acceso lo suficiente para agarrar el extremo libre. Levanta el pestillo de liberación hasta que quede vertical.

    The A1286 has no Access Door.!!

    I actually can see no sign of the battery!...

    aguib - Contestar

    Zitat von aguib:

    The A1286 has no Access Door.!!

    I actually can see no sign of the battery!...

    I assume you have the newer model, with the built-in battery. It's still removable with tools, but these are the wrong instructions for that model.

    lgc90 - Contestar

    when will there be a guide for the other unibody macbook pro. that does not have an access door?

    irishking - Contestar

    Is there a manual to show, how disasembly the display, i mean, after step 5, to check the display between lcd and aluminiun back case?

    Max

    Max - Contestar

    On other guides you state the height of the HD that can be supported, e.g. MacBook Pro 15" Core 2 Duo Model A1211 Festplatte tauschen , I have read ( but have not confirmed ) that the uni-body MacBook Pro can be fitted with the 750GB and 1TB 12mm drive from Western Digital.

    Can you confirm this?

    Many thanks in advance.

    ahothabeth - Contestar

    Zitat von SHerwood Ball:

    My display and aluminum casing has separated.

    I don't know if it just snaps back together or does it need to be glued.

    I dropped mine on the carpeted stairs and the display still works.

    I'm hoping I can just snap it back together and that no plastic pieces or teeth of the snapping

    portion have been broken........

    SHerwood Ball - Contestar

    When you say "left fan" is this "left when looking at the logic board after turning the computer over and looking it up opening it up" or "left when sitting at the computer keyboard and typing on it"?

    thvv - Contestar

    We always use left and right in reference to the computer when you're using it.

    Andrew Optimus Goldberg -

    Directions were great and the worn dc in board was replaced. The hardest part of the procedure is disconnecting the data display cable. A better description of step 21 is to slide the connector parallel to the circuit board towards the outside corner. Reconnecting correctly took several tries.

    I used the tip of the spudger to nudge the corners a little at a time to seat the connector.

    The ribbon connector for the keyboard has to be inserted all the way before seating the retaining cap. It took me three tries . First try power button did not work second try numbers keys did not work.

    Thanks for the directions ...could not have done it with out them!!!

    landryd - Contestar

    Hola. Poseo un MacBook Pro Late 2008 y debo cambiarle las cornetas. Me sirve unas cornetas de un MBP Late 2011?

    jegonzalez80 - Contestar

  2. La puerta de acceso ahora debe estar lo suficientemente levantada para levantarla y sacarla del Unibody.
    • La puerta de acceso ahora debe estar lo suficientemente levantada para levantarla y sacarla del Unibody.

    Agregar Comentario

Conclusión

Para volver a montar su dispositivo, siga estas instrucciones en orden inverso.

39 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 23

Últimos 30 Días: 75

Todo El Tiempo: 28,797