Introducción

Having connectivity issues? Use this guide to replace the AirPort board.

  1. Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

      • Eight 3.0 mm

      • Two 2.3 mm

  2. Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    • Set the lower case aside.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  4. Peel back the warning label covering the battery connector.
    • Peel back the warning label covering the battery connector.

  5. Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board. Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.
    • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

    • Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

  6. Use the tip of a spudger to detach the three antenna connectors up from their sockets on the AirPort board.
    • Use the tip of a spudger to detach the three antenna connectors up from their sockets on the AirPort board.

  7. Remove the single 2.9 mm T5 Torx screw securing the AirPort board to the logic board. Grasp the edges of the board and slide it out from its connector.
    • Remove the single 2.9 mm T5 Torx screw securing the AirPort board to the logic board.

    • Grasp the edges of the board and slide it out from its connector.

    • Lift and remove the AirPort board.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Equipo

iFixit Miembro de iFixit

Community

109 Miembros

7,761 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 22

Últimos 30 Días: 104

Todo El Tiempo: 8,174