Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This detects the light level in the room to adjust the backlit keyboard.
Qué necesitas
-
-
Use your fingers to push both battery release tabs away from the battery, and lift the battery out of the computer.
-
-
-
Remove the two 2.8 mm Phillips screws in the battery compartment near the latch.
-
-
-
-
Disconnect the left ambient light sensor cable from the logic board by placing a spudger beneath the cable and lifting up.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.