Repara tus cosas Comunidad Tienda

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement

Introducción

Remove the lower case to access the internal components of your MacBook Pro.

Qué necesitas

  1. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement, Lower Case: paso 1, imagen 1 de 1

    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

    • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

    Traducir

  3. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: paso 2, imagen 1 de 2 MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: paso 2, imagen 2 de 2

    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

85 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Andrew Optimus Goldheart

Miembro Desde 10/17/09

502,858 Reputación

407 Guías creadas

Insignias: 44

+ 41 más insignias

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

16,817 Guías creadas

7 comentarios

When purchasing a new bottom panel, do any of the stickers or pads have to be transferred to the new part? How?

Matthew Parrott - Contestar

This is the instructions on how to just remove the bottom cover to access other components. The part is sold here on iFixit for $99 and looks to include the rubber feet.

Cwoodyard -

Where can I get a new backover?

SkyGamer - Contestar

The back cover is sold here and can be found at the top of the page.

Cwoodyard -

Can i buy this bottom replacement piece here or is this instructions on how to do it?

itsRadioBiz - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 36

Ultimos 30 días: 139

Todo El Tiempo: 64,920