Introducción
This serves as the starting point for every guide—you'll need a P5 Pentalobe screwdriver to remove the lower case and get into the device.
Qué necesitas
-
Herramienta utilizada en este paso:Magnetic Project Mat$19.95
-
Remove the following ten screws securing the lower case to the upper case:
-
Two 2.3 mm P5 Pentalobe screws
-
Eight 3.0 mm P5 Pentalobe screws
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
27 personas más completaron esta guía.
5 comentarios
Nice………………..!
I’m trying to install my lower case back but it’s refusing to clip back in. Any way I can fix it?