Introducción

Use this guide to replace a damaged lower case.

    • Before proceeding, power down your machine. Close the display and lay it on a soft surface top-side down.

    • Remove the following ten screws:

      • Two 9 mm P5 Pentalobe screws

      • Eight 2.6 mm P5 Pentalobe screws

    • The special screwdriver needed to remove the ten 5-point Pentalobe screws can be found here.

  1. Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.
    • Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.

    • Remove the lower case and set it aside.

Conclusión

To reassemble your device, follow these instructions in reverse order.

11 personas más completaron esta guía.

Equipo

iFixit Miembro de iFixit

Community

108 Miembros

7,526 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 13

Últimos 30 Días: 56

Todo El Tiempo: 8,441