Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Use this guide when you want to replace and/or recycle your battery.

  1. Make sure that the laptop is turned off before starting.
    • Make sure that the laptop is turned off before starting.

    • Place laptop with the bottom plate facing up.

  2. Remove all screws using  the JIS #1 screwdriver.
    • Remove all screws using the JIS #1 screwdriver.

  3. Remove the back plate.
    • Remove the back plate.

    • Locate the battery.

  4. SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación

    SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación
  5. Locate the foil connector above the battery.
    • Locate the foil connector above the battery.

  6. Flip up both black clips with your spudger.
    • Flip up both black clips with your spudger.

  7. Remove the foil connector by pulling on the blue tabs.
    • Remove the foil connector by pulling on the blue tabs.

  8. After the foil connector is removed you will see an 8 pin connector.
    • After the foil connector is removed you will see an 8 pin connector.

    • Disconnect the 8 Pin connector.

  9. Lift the battery and remove.
    • Lift the battery and remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

Perfect guide

storolle - Contestar

Anyone know what the foil connector is? Mine is broken, and needs to be replaced.

Jonathan Hawkes - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 30

Ultimos 30 días: 129

Todo El Tiempo: 5,215