Repara tus cosas Comunidad Tienda

LaCie Rugged USB-C Circuit Board Replacement

Qué necesitas

  1. LaCie Rugged USB-C Circuit Board Replacement, Overview: paso 1, imagen 1 de 3 LaCie Rugged USB-C Circuit Board Replacement, Overview: paso 1, imagen 2 de 3 LaCie Rugged USB-C Circuit Board Replacement, Overview: paso 1, imagen 3 de 3

    • This guide contains steps for the LaCie Rugged USB-C. There is no guarantee that the steps will be the same for different models.

    Editar

  2. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: paso 2, imagen 1 de 2 LaCie Rugged USB-C Circuit Board Replacement, Case Removal: paso 2, imagen 2 de 2

    • Remove the rubber case around the drive. You can just stretch it off.

    Editar

  3. LaCie Rugged USB-C Circuit Board Replacement, Case Screws: paso 3, imagen 1 de 2 LaCie Rugged USB-C Circuit Board Replacement, Case Screws: paso 3, imagen 2 de 2

    • Remove these 4x Torx T8 screws

    Editar

  5. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: paso 4, imagen 1 de 2 LaCie Rugged USB-C Circuit Board Replacement, Case Removal: paso 4, imagen 2 de 2

    • Push on one side of the drive, where the white plastic is. Which side does not matter.

    Editar

  6. LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: paso 5, imagen 1 de 2 LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: paso 5, imagen 2 de 2

    • Push GENTLY on the back side of the hard drive.

    • DO NOT push more than is necessary to get the drive above the white plastic, as shown in the second picture.

    Editar

  7. LaCie Rugged USB-C Circuit Board Replacement, Drive Removal: paso 6, imagen 1 de 1

    • Pull the drive gently out of the SATA connector.

    Editar

  8. LaCie Rugged USB-C Circuit Board Replacement, Screw Removal: paso 7, imagen 1 de 1

    • Remove this Phillips 00 screw from the board.

    Editar

  9. LaCie Rugged USB-C Circuit Board Replacement, Board Removal: paso 8, imagen 1 de 1

    • Slide the board out, making sure to keep any foam pieces intact.

    • Do not let any foam pieces get damaged. They are important.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Autor

con 1 otro colaborador

9021007

Miembro Desde 07/13/18

4,599 Reputación

25 Guías creadas

Insignias: 22

+ 19 más insignias

3 comentarios

Where can i get a new board? thank you

Bar Avraham - Contestar

Yes, where can we find a new board?

Vassilis Trigkas - Contestar

Right, where can the part be purchased?????

James Causey - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 12

Ultimos 30 días: 51

Todo El Tiempo: 1,402